Netgear DGND3300v2 DGND3300 User Manual - Page 86

Table 6-1., LAN Setup, Customizing Your Network Settings - address reservation

Get Netgear DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router PDF manuals and user guides View all Netgear DGND3300v2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 86 highlights

RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual Table 6-1. LAN Setup Settings LAN TCP/IP Setup IP Address IP Subnet Mask RIP Direction RIP Version DHCP Server For more information Use Router as a DHCP Server Starting IP Address Ending IP Address Address Reservation For more information, see "Address Reservation" on page 6-4. Description The LAN IP address of the modem router. The LAN subnet mask of the modem router. Combined with the IP address, the IP Subnet Mask allows a device to know which other addresses are local to it, and which must be reached through a gateway or modem router. RIP (Router Information Protocol) allows a modem router to exchange routing information with other routers. This setting controls how the modem router sends and receives RIP packets. Both is the default. • Both or Out Only. The modem router broadcasts its routing table periodically. • Both or In Only. The modem router incorporates the RIP information that it receives. • None. The modem router will not send any RIP packets and will ignore any RIP packets received. This controls the format and the broadcasting method of the RIP packets that the modem router sends. It recognizes both formats when receiving. By default, this is RIP-1. • RIP-1 is universally supported. It is adequate for most networks, unless you have an unusual network setup. • RIP-2 carries more information. Both RIP-2B and RIP-2M send the routing data in RIP-2 format. RIP-2B uses subnet broadcasting. RIP-2M uses multicasting. This check box is usually selected so that the modem router functions as a Dynamic Host Configuration Protocol (DHCP) server. See "Using the Modem Router as a DHCP Server" on page 6-4. Specify the start of the range for the pool of IP addresses in the same subnet as the modem router. Specify the end of the range for the pool of IP addresses in the same subnet as the modem router. When you specify a reserved IP address for a computer on the LAN, that computer receives the same IP address each time it access the modem router's DHCP server. Assign reserved IP addresses to servers that require permanent IP settings. Customizing Your Network Settings 6-3 v1.0, September 2009

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual
Customizing Your Network Settings
6-3
v1.0, September 2009
LAN TCP/IP
Setup
IP Address
The LAN IP address of the modem router.
IP Subnet Mask
The LAN subnet mask of the modem router. Combined with
the IP address, the IP Subnet Mask allows a device to know
which other addresses are local to it, and which must be
reached through a gateway or modem router.
RIP Direction
RIP (Router Information Protocol) allows a modem router to
exchange routing information with other routers. This
setting controls how the modem router sends and receives
RIP packets.
Both
is the default.
•
Both
or
Out Only
. The modem router broadcasts its
routing table periodically.
•
Both
or
In Only
. The modem router incorporates the RIP
information that it receives.
•
None
. The modem router will not send any RIP packets
and will ignore any RIP packets received.
RIP Version
This controls the format and the broadcasting method of the
RIP packets that the modem router sends. It recognizes
both formats when receiving. By default, this is
RIP-1
.
•
RIP-1 is universally supported. It is adequate for most
networks, unless you have an unusual network setup.
•
RIP-2 carries more information. Both RIP-2B and RIP-2M
send the routing data in RIP-2 format. RIP-2B uses
subnet broadcasting. RIP-2M uses multicasting.
DHCP Server
For more
information
Use Router as a DHCP
Server
This check box is usually selected so that the modem router
functions as a Dynamic Host Configuration Protocol
(DHCP) server. See
“Using the Modem Router as a DHCP
Server” on page 6-4
.
Starting IP Address
Specify the start of the range for the pool of IP addresses in
the same subnet as the modem router.
Ending IP Address
Specify the end of the range for the pool of IP addresses in
the same subnet as the modem router.
Address Reservation
For more information, see
“Address
Reservation” on page 6-4
.
When you specify a reserved IP address for a computer on
the LAN, that computer receives the same IP address each
time it access the modem router’s DHCP server. Assign
reserved IP addresses to servers that require permanent IP
settings.
Table 6-1.
LAN Setup
Settings
Description