Netgear WAC730-Business User Manual - Page 101
Con IPv6 Settings, Con Advanced Network and WiFi Features
View all Netgear WAC730-Business manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Dual-Band Wireless AC Access Point WAC720 and WAC730 User Manual Configure IPv6 Settings The access point supports IPv6. You can manage the access point from an IPv6 address. The access point can also function as an IPv6 DHCP client. Note For information about how to configure the IPv4 settings, see Configure the IPv4 Settings on page 23. WARNING: If you enable the DHCP client, the IP address of the access point changes when you click the Apply button, causing you to lose your connection to the access point.You then must use the new IP address to reconnect to the access point. Tip If you enable the DHCP client on the access point, you can discover the new IP address of the access point by accessing the DHCP server on your LAN, or by using a network IP address scanner application. To configure the IPv6 settings: 1. Open a web browser from a computer that is connected to the same network as the access point or to the access point directly through an Ethernet cable. For more information, see Log In to the Access Point on page 16. 2. In the address bar, enter the IP address of the access point. A login window opens. 3. Enter the user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. 4. Select Configuration > IP > IPv6 Settings. 5. Configure the IPv6 settings as described in the following table. Configure Advanced Network and WiFi Features 101