Netgear WAC730-Business User Manual - Page 25
admin, password, Configuration > Wireless > Basic > Wireless Settings, 11bg., Turn Radio
View all Netgear WAC730-Business manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Dual-Band Wireless AC Access Point WAC720 and WAC730 User Manual 3. Enter the user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. 4. Select Configuration > Wireless > Basic > Wireless Settings. Select the WiFi mode in the 2.4 GHz band: • 11bg. 802.11b-compliant devices and 802.11g-compliant devices can connect to the access point. • 11ng. 802.11n-compliant devices and 802.11g-compliant devices can connect to the access point • 11bgn. This is the default setting. 802.11b-compliant devices, 802.11n-compliant devices and 802.11g-compliant devices can connect to the access point. If you keep the default setting, go to step 8. When you change the WiFi mode, the Turn Radio On check box is automatically cleared, and all fields, buttons, and menus on the page are masked out. 5. Turn on the radio by selecting the Turn Radio On check box. A pop-up window opens. Note Under normal conditions, you want the radio to be turned on. Turning off the radio disables access through the access point, which can be helpful for configuration, network tuning, or troubleshooting activities. 6. Click the OK button to confirm the change of WiFi mode. The change does not take effect until you click the Apply button after you complete the WiFi configuration. Initial Setup 25