Netgear WAC730-Business User Manual - Page 69
Restore the Access Point to the Factory Default Settings
View all Netgear WAC730-Business manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Dual-Band Wireless AC Access Point WAC720 and WAC730 User Manual 5. Click the Choose File button and locate and select the backup configuration file (the file name is config). IMPORTANT: During the restoration process, do not try to go online, turn off the access point, shut down the computer, or do anything else to the access point until it finishes restarting! 6. Click the Apply button to initiate the restoration process. During the restoration process, the access point automatically restarts. The restoration process typically takes about one minute. When the Test LED turns off, wait a few more seconds before doing anything with the access point. Restore the Access Point to the Factory Default Settings You can restore the access point to the factory default settings by two methods that are described in the following sections: • Use the Local Browser Interface to Restore Factory Default Settings on page 70 • Use the Reset Button to Restore Factory Default Settings on page 70 Note After you restore the factory default settings on the access point, the following occurs: • All custom configurations are lost. • The login password is password. • The default LAN IP address is 192.168.0.100. • The DHCP client is enabled. • Business Central mode is enabled. • The name in the Access Point Name field is reset to the name that is printed on the access point label. Manage and Monitor the Access Point 69