Netgear WAC730-Business User Manual - Page 153
Modify a MAC Address Filter Profile on an Access Point in Business Central Mode
View all Netgear WAC730-Business manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Dual-Band Wireless AC Access Point WAC720 and WAC730 User Manual 8. From the MAC Filter Profile Name menu, select the profile that you want to use. 9. Select one of the following MAC ACL Mode radio buttons: • Accept List. All MAC address that are in the selected profile are allowed WiFi access and all MAC addresses that are not in the profile are denied WiFi access. • Deny List. All MAC address that are in the selected profile are denied WiFi access and all MAC addresses that are not in the profile are allowed WiFi access. (This is the default selection.) 10. Click the Apply button. Your settings are saved. 11. Click the Back button. The Profile Settings page displays again. Modify a MAC Address Filter Profile on an Access Point in Business Central Mode To modify an existing MAC address filter profile: 1. Open a web browser from a computer that is connected to the same network as the access point or to the access point directly through an Ethernet cable. For more information, see Log In to the Access Point on page 16. 2. In the address bar, enter the IP address of the access point. A login window opens. 3. Enter the user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. 4. Select Configuration > Security > MAC Authentication. The MAC Authentication page displays and shows a table with MAC address filter profiles. 5. If more than one profile exists, select the check box for the profile that you want to modify. 6. Click the Edit button. The Edit MAC Filter Profile pop-up window opens. Configure the Access Point in Business Central Mode 153