Oki PRO8432WT Pro8432WT - User Guide - Page 107
Cleaning LED Heads, Turn off your printer by pressing
![]() |
View all Oki PRO8432WT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
9 Hook one tab (3) of the paper feed roller cover by pressing the right arm (4) inward while lifting up the MP tray (1) lightly. Note ●● If closing the MP tray without returning the tab to the correct position, the paper set cover may be broken. Be sure to return the tab to the original position. 4 1 3 10 Also hook the other tab (3) of the paper feed roller cover by pressing the left arm (4) inward while lifting up the MP tray (1) lightly. Note ●● If closing the MP tray without returning the tab to the correct position, the paper set cover may be broken. Be sure to return the tab to the original position. 4 Cleaning Cleaning LED Heads Clean the LED heads if vertical lines appear, images are fading vertically, or the periphery of letters is smudged in the printouts. Dirt on the LED heads may also cause paper jams. Note ●● Do not use methyl alcohol or thinners as a cleaning agent. They may damage the LED heads. ●● Do not expose the image drum to direct sunlight or very bright interior light (approximately more than 1500 lux). Even under the normal interior light, do not leave it for more than 5 minutes. 1 Turn off your printer by pressing the power switch. 4 Reference ●● "Turning Off the Power" P.22 2 Insert your finger into the recess on the right side of the printer and pull the front cover open lever (1) to open the front cover (2) forward. 4. Maintenance 3 1 11 Close the MP tray (1). If the MP tray cannot be closed, return the paper set cover to the correct position by pressing the paper loading part on the MP tray downward. 1 2 3 Press the output tray open button (3) and open the output tray (4). CAUTION Possible to get burned. ●● The fuser unit is extremely hot. Do not touch it. 3 4 1 - 107 -
![](/manual_guide/products/oki-data-pro8432wt-pro8432wt-user-guide-1687067/107.png)