Panasonic D10000U Operating Instructions - Page 17

Getting Started Using the remote control unit Loading batteries When loading supplied AA batteries into the battery compartment of the Remote Control, make sure that their polarities are correct. 1. Open battery compartment lid. • Open the lid in the order # and then $. $ # 2. Insert the batteries. • Into battery compartment, with their polarities orientated as indicated ( + , - ) in the compartment. Supplied AA batteries (insert the - side first). 3. Close the battery compartment lid. • Replace the battery compartment lid over the compartment and slide until it clicks. Attention • Do not drop the Remote Control unit. • Do not expose Remote Control unit to any liquid. • Do not use NiCd batteries. • Release the LOCK button before operating the remote control. (p. 13) Effective range of remote control operation The Remote Control should normally be aimed at either the front or rear remote control receiver window on the projector (figure 1). The effective control range is approx. 30 metres from the beam receiver on the front or rear. Otherwise, it may also be aimed at the screen, which will reflect commands back to the projector's front receiver window as illustrated in figure 2. • When the Remote Control is aimed at the screen, the effective control range may be reduced due to the optical loss by screen reflection. Figure 1 • Top View (Front) 30° (Rear) 30° Remote 30° Control 30° Remote Control • Side View Remote Control 30° 30° 15° Remote 15° Control 15° 15° Remote 30° 30° Control Remote Control Figure 2 Screen Projector Remote Control Remote Control Remote Control receiver window receiver window (front) (rear) ENGLISH - 17