Panasonic D10000U Operating Instructions - Page 39

Automatic adjustment AUTO SETUP

Get Panasonic D10000U - SXGA+ DLP Projector PDF manuals and user guides
UPC - 791871111413
View all Panasonic D10000U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Automatic adjustment (AUTO SETUP) How to adjust the lens for addressing unevenness of focusing If the image is out of focus in any portion of the screen, adjust the lens by turning the adjustment screws to obtain evenness of focusing. Lens bracket a Fixing screws b c V up H left H right 1. Remove the projection lens cover and lens. (p. 33) 2. Loosen the 3 fixing screws that secure the lens bracket about two turns. • Tool to be used : Allen hex socket driver or Allen wrench (2.5 mm diagonal hexagon) 3. Install the lens removed in step 1. 4. Adjust the lens by turning the adjustment screws a, b and c counterclockwise. • Adjust the screws a, b and c after installing the lens. • Tool to be used : Allen hex socket driver or Allen wrench (2.5 mm diagonal hexagon) V bottom Basic Operation The instructions within parentheses apply to ceiling mount installation. V up is out of focus V bottom is out of focus H right is out of focus H left is out of focus a (Turn counterclockwise) Turn counterclockwise ( ) ( ) ( ) b Turn counterclockwise ( ) (Turn counterclockwise) Turn counterclockwise ( ) (Turn counterclockwise) c Turn counterclockwise ( ) (Turn counterclockwise) (Turn counterclockwise) Turn counterclockwise ( ) For example: When the image is out of focus in the upper portion of the screen (V up): Turn the adjustment screws b and c little by little counterclockwise while checking evenness of focusing in the upper and lower portions. Attention • When moving the projector, return the lens to the home position (p. 38), and then tighten the 3 fixing screws to secure the lens bracket. ENGLISH - 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
ENGLISH –
39
Basic Operation
For example:
When the image is out of focus in the upper portion of the screen (V up):
Turn the adjustment screws
b
and
c
little by little counterclockwise while checking evenness of
focusing in the upper and lower portions.
How to adjust the lens for addressing unevenness of
focusing
If the image is out of focus in any portion of the screen, adjust the lens by turning the adjustment screws to obtain
evenness of focusing.
The instructions within parentheses apply to ceiling mount installation.
V up is out of focus
V bottom is out of focus
H right is out of focus
H left is out of focus
a
(Turn counterclockwise)
Turn counterclockwise
(
)
(
)
(
)
b
Turn counterclockwise
(
)
(Turn counterclockwise)
Turn counterclockwise
(
)
(Turn counterclockwise)
c
Turn counterclockwise
(
)
(Turn counterclockwise)
(Turn counterclockwise)
Turn counterclockwise
(
)
Attention
When moving the projector, return the lens to the home position (p. 38), and then tighten the 3 fixing screws to
secure the lens bracket.
•
1. Remove the projection lens
cover and lens. (p. 33)
2. Loosen the 3 fixing screws that
secure the lens bracket about
two turns.
Tool to be used :
Allen hex socket driver or Allen wrench (2.5 mm
diagonal hexagon)
3. Install the lens removed in step
1.
4. Adjust the lens by turning the
adjustment screws
a
,
b
and
c
counterclockwise.
Adjust the screws
a
,
b
and
c
after installing
the lens.
Tool to be used :
Allen hex socket driver or Allen wrench (2.5 mm
diagonal hexagon)
•
•
•
Automatic adjustment (AUTO SETUP)
V up
V bottom
H right
H left
a
b
c
Fixing screws
Lens bracket