Panasonic D10000U Operating Instructions - Page 98

Using the PJLink™ protocol The network functions of this projector are compatible with PJLink™ Class 1, and so the PJLink™ protocol can be used to carry out the following operations from a computer. • Projector settings • Querying the projector status Supported commands The following table lists the PJLink™ protocol commands that can be used to control the projector. Command Control details Notes POWR Power supply control Parameters 0 = Standby 1 = Power ON POWR ? Parameters Power supply status query 0 = Standby 1 = Power ON 2 = Cool-down in progress 3 = Warm-up in progress INPT INPT ? Input selection Input selection query Parameters 11 = RGB1 12 =RGB2 21 = VIDEO 22 = S-VIDEO 31 = DVI-D 32 = AUX (only enabled if ET-MD77DV, ET-MD77SD1 or ET-MD77SD3 is installed) AVMT AVMT ? Shutter control Shutter mode query Parameters 30 = Shutter mode off (picture mute cancelled) 31 = Shutter mode on (picture mute) ERST? LAMP ? INST ? NAME ? INF1 ? INF2 ? INFO ? CLSS ? Error status query Parameters 1st byte: Indicates fan errors, range 0--2 2nd byte: Indicates lamp errors, range 0--2 3rd byte: Indicates temperature errors, range 0--2 4th byte: Fixed at 0 5th byte: Indicates filter errors, range 0--2 6th byte: Indicates other errors, range 0--2 Definitions for each value from 0 to 2 are as follows. 0 = No error known 1 = Warning 2 = Error Lamp status query Parameters 1st digits (1--5 digits): Lamp 1 cumulative operating time 2nd digit: 0 = Lamp 1 off, 1 = Lamp 1 on 3rd digits (1--5 digits): Lamp 2 cumulative operating time 4th digit: 0 = Lamp 2 off, 1 = Lamp 2 on 5th digits (1--5 digits): Lamp 3 cumulative operating time 6th digit: 0 = Lamp 3 off, 1 = Lamp 1 on 7th digits (1--5 digits): Lamp 4 cumulative operating time 8th digit: 0 = Lamp 4 off, 1 = Lamp 2 on Input selection list query The following are returned as parameters. "11 12 21 22 31" (If any of the ET-MD77DV, ET-MD77SD1 or ET-MD77SD3 are installed, "11 12 31 22 31 32" is returned.) Projector name query The name set for "HOST NAME" in "NETWORK" is returned. Manufacturer name query "Panasonic" is returned. Model name query "D10000" or "DW10000" is returned. Other information query Information such as version number is returned. Class information query "1" is returned. ■ PJLink™ security authorization The password used for PJLink™ is the same as the password which has been set for web browser control. If you would like to use PJLink™ without authorization being used, leave the password for web browser control blank. • PJLink™ is a pending trademark in Japan, the United States and other countries and regions. For details on PJLink™ specifications, refer to the Japan Business Machine and Information System Industries Association website. The URL is http://pjlink.jbmia.or.jp/english/ 98 - ENGLISH