Panasonic D10000U Operating Instructions - Page 61
Basic Operation, Blanking adjustment, Adjusting the input resolution
UPC - 791871111413
View all Panasonic D10000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Blanking adjustment Blanking adjustment fine-tunes the images projected by the video deck or other devices when the noise appears on the edges of the screen or if a part of the image lies slightly offscreen. 1. Press ▲▼ to select "BLANKING". ADVANCED MENU DIGITAL CINEMA REALITY BLANKING INPUT RESOLUTION CLAMP POSITION EDGE BLENDING FRAME DELAY RASTER POSITION AUTO OFF DEFAULT MENU SELECT ENTER SUB MENU 2. Press ENTER. • The "BLANKING" adjustment screen will be displayed. BLANKING UPPER 0 LOWER 0 LEFT 0 RIGHT 0 MENU SELECT ADJUST 3. Press ▲▼ to select the desired item for adjustment. 4. Press ◄► to adjust blanking. • The adjustment value for the PT-D10000U can be changed within a range of 0 to 255 vertically and 0 to 700 horizontally. • The adjustment value for the PT-DW10000U can be changed within a range of 0 to 540 vertically and 0 to 960 horizontally. When correcting the upper blanking of the screen (top) Press ◄ button to move the blanking zone upward; ► button to downward. When correcting the lower blanking of the screen (bottom) Press ► button to move the blanking zone upward; ◄ button to downward. When correcting the left hand blanking of the screen (left) Press ► button to move the blanking zone to the right; ◄ button to the left. When correcting the right hand blanking of the screen (right) Press ◄ button to move the blanking zone to the right; ► button to the left. Adjusting the input resolution Input resolution adjustment achieves the best image when the screen flickers or halo is observed around the contour. 1. Press ▲▼ to select "INPUT RESOLUTION". ADVANCED MENU DIGITAL CINEMA REALITY BLANKING INPUT RESOLUTION CLAMP POSITION EDGE BLENDING FRAME DELAY RASTER POSITION AUTO OFF DEFAULT MENU SELECT ENTER SUB MENU 2. Press ENTER. • The "INPUT RESOLUTION" screen will be displayed. INPUT RESOLUTION TOTAL DOTS DISPLAY DOTS TOTAL LINES DISPLAY LINES MENU SELECT ADJUST 1344 1024 809 768 3. Press ▲▼ to select "TOTAL DOTS", "DISPLAY DOTS", "TOTAL LINES" or "DISPLAY LINES", and the press ◄► to adjust it. • Each item automatically displays a value in response to the type of the input signal. If vertical stripes appear on the screen or the image is partly missing, increase or decrease the displayed value while observing the screen to achieve the optimal value. ENGLISH - 61 Basic Operation