Panasonic D10000U Operating Instructions - Page 38

How to adjust the lens (continued) Adjustment range after lens position (optical shift) Do not move the lens beyond the bounds of the shift range as this may cause a change in the focus. This limitation is to protect the parts of the projector. Using the standard projection position as the reference, the optical axis shift function makes it possible to adjust the projection position in the ranges shown in the figures below. Model number of projection lens PT-D10000U PT-DW10000U 0.15V 0.50V Projected screen 0.15V height, V 0.15V 0.12V 0.40V 0.12V height, V 0.12V Projected screen ET-D75LE6 Standard projection position Standard projection position 0.15V 0.50V 0.12V 0.40V Zoom Lens 0.2H 0.2H Projected screen width, H 0.15H 0.15H Projected screen width, H 0.15V 0.60V Projected screen 0.15V height, V 0.15V 0.1V 0.50V 0.1V Projected screen ET-D75LE1 ET-D75LE2 ET-D75LE3 ET-D75LE4 ET-D75LE8 height, V Standard projection position Standard projection position 0.15V 0.60V 0.1V 0.50V 0.1V 0.3H 0.3H Projected screen width, H 0.2H 0.2H Projected screen width, H Note • The ET-D75LE5 has a fixed focal point, and so shift adjustment cannot be carried out. Moving the projection lens position to the home position 1. Press and hold LENS on the projector's controls or SHIFT on the remote control for 3 seconds or more. LENS SHIFT ɹENɹTERɹE X E C U T E ɹMEɹNUɹC A N C E L 2. Press ENTER while the menu shown above is being displayed. (It will be displayed for about 5 seconds.) • "PROGRESS..." will appear in the menu, and the projection lens will move to the home position. Note • The home position for the projection lens is the lens position when the lens is being replaced or when the projector is being stored away, and it is not the optical center of the screen. 38 - ENGLISH