Panasonic D10000U Operating Instructions - Page 78
Lamp select
UPC - 791871111413
View all Panasonic D10000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Option2 settings (continued) Lamp select This lets you switch the four light source lamps to one of four brightnesses in accordance with the operating conditions and purpose of use. 1. Press ▲▼ to select "LAMP SELECT". OPTION2 PROJECTOR ID INSTALLATION ALTITUDE DIRECTION LAMP SELECT LAMP RELAY RS-232C 2 FRONT-F LOW H QUAD OFF SYSTEM INFORMATION AIR FILTER CLEANING DATE AND TIME STARTUP LOGO PASSWORD LOGO1 MENU SELECT CHANGE ENTER EXECUTE 2. Press ◄► to switch "LAMP SELECT". • The setting will change as follows each time ◄► is pressed. TRIPLE QUAD DUAL L1 SINGLE L2 L2/L3/L4 L3 L1/L3/L4 L4 L1/L2/L4 L1/L4 L1/L2/L3 L2/L3 • "QUAD" : The four lamps illuminate. • "L1" : One lamp illuminates. (Lamp unit 1 takes priority.) • "L2" : One lamp illuminates. (Lamp unit 2 takes priority.) • "L3" : One lamp illuminates. (Lamp unit 3 takes priority.) • "L4" : One lamp illuminates. (Lamp unit 4 takes priority.) • "L1/L4" : Two lamps illuminate. (Lamp unit 1 and 4 take priority.) • "L2/L3" : Two lamps illuminate. (Lamp unit 2 and 3 take priority.) • "L1/L2/L3" : Three lamps illuminate. (Lamp units 1, 2 and 3 take priority.) • "L1/L2/L4" : Three lamps illuminate. (Lamp units 1, 2 and 4 take priority.) • "L1/L3/L4" : Three lamps illuminate. (Lamp units 1, 3 and 4 take priority.) • "L2/L3/L4" : Three lamps illuminate. (Lamp units 2, 3 and 4 take priority.) • "SINGLE" : One of the lamps illuminates. (The lamp unit with the shortest operating time is selected automatically.) • "DUAL" : Two lamps illuminate. (The lamp units with the shortest operating time out of lamp units 1 and 4 or 2 and 3 are selected automatically.) • "TRIPLE" : Three lamps illuminate. (The lamp unit with the shortest operating time is selected automatically.) 3. Press ENTER. Note • For settings other than "QUAD", any lamp which is malfunctioning or which has a cumulative operating time that exceeds 2 000 hours will be turned off and the other lamps will be turned on. If "QUAD" is selected, any lamp which is malfunctioning or which has a cumulative operating time that exceeds 2 000 hours will be turned off and only the lamps which have a cumulative operating time of less than 2 000 hours will be turned on. In addition, if the cumulative operating times for all lamps exceed 2 000 hours, the projector will switch to standby mode. • Lamp units which are not turned on should still be installed to the projector. • If the lamp selection is changed, picture is muted during lamp switching execution. (7-25 sec.) 78 - ENGLISH