Panasonic D10000U Operating Instructions - Page 55
Basic Operation, To display pictures complying, with the, sRGB standard
UPC - 791871111413
View all Panasonic D10000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Basic Operation * When DEFAULT is pressed, the projector automatically returns to AUTO1 or AUTO. ■ RGB1/RGB2/DVI-D terminal input signals RGB YPBPR Note • Refer to the types of RGB/YPBPR/DVI-D signals compatible with the projector. (p. 118) To display pictures complying with the sRGB standard sRGB is the international color reproduction standard (IEC61966-2-1) established by IEC (International Electrotechnical Commission). To reproduce colors more faithfully in compliance with the sRGB standard, perform the following setting procedure. 1. Set "COLOR MATCHING" adjustment to "OFF". (p. 67) 2. Display the "PICTURE" screen. (p. 49) 3. Press ▲▼ to select "PICTURE MODE". PICTURE PICTURE MODE CONTRAST BRIGHTNESS COLOR TINT COLOR TEMP. GAMMA SHARPNESS NOISE REDUCTION DYNAMIC IRIS SYSTEM SELECTOR NATURAL 0 0 10 1 DEFAULT DEFAULT 0 OFF OFF AUTO 1 MENU SELECT CHANGE ENTER REGISTER 4. Press ◄► to select "NATURAL". 5. Press ▲▼ to select "COLOR". PICTURE PICTURE MODE CONTRAST BRIGHTNESS COLOR TINT COLOR TEMP. GAMMA SHARPNESS NOISE REDUCTION DYNAMIC IRIS SYSTEM SELECTOR NATURAL 0 0 10 1 DEFAULT DEFAULT 0 OFF OFF AUTO 1 MENU SELECT ADJUST 6. Press DEFAULT on the remote control to restore the factory default. 7. Follow the same procedure (steps 5-6) to restore the factory default for "TINT", "COLOR TEMP." and "GAMMA". Note • sRGB is only enable when RGB signals are being input. ENGLISH - 55