Pioneer AVH-4200NEX Owner s Manual - Page 6
Notes on internal memory - for sale
View all Pioneer AVH-4200NEX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Precaution Rear view camera With an optional rear view camera, you are able to use this product as an aid to keep an eye on trailers, or backing into a tight parking spot. WARNING SCREEN IMAGE MAY APPEAR REVERSED. USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE. CAUTION For safety reasons, the rear view camera function is not available until this product boots up completely. The rear view mode is to use this product as an aid to keep an eye on the trailers, or while backing up. Do not use this function for entertainment purposes. Handling the SD card slot CAUTION Keep the SD memory card out of the reach of small children to prevent them from accidentally swallowing it. To prevent data loss and damage to the storage device, never remove it from this product while data is being transferred. If data loss or corruption occurs on the storage device for any reason, it is usually not possible to recover the data. Pioneer accepts no liability for damages, costs or expenses arising from data loss or corruption. Never insert or eject an SD memory card while driving. Handling the USB connector To prevent data loss and damage to the storage device, never remove it from this product while data is being transferred. Pioneer cannot guarantee compatibility with all USB mass storage devices and assumes no responsibility for any loss of data on media players, iPhone, smartphone, or other devices while using this product. 6 Failure to operate After-sales service for Pioneer products Please contact the dealer or distributor from which you purchased the product for after-sales service (including warranty conditions) or any other information. In case the necessary information is not available, please contact the companies listed below. Please do not ship your product to the companies at the addresses listed below for repair without making advance contact. USA&CANADA Pioneer Electronics (USA) Inc. CUSTOMER SUPPORT DIVISION P.O. Box 1760 Long Beach, CA 90801-1760 800-421-1404 For warranty information, please see the Limited Warranty sheet included with your product. Visit our website Visit us at the following site: http://www.pioneerelectronics.com In Canada http://www.pioneerelectronics.ca We offer the latest information about PIONEER CORPORATION on our website. Pioneer regularly provides software updates to further improve it's products. Please check the support section of the Pioneer website for all available software updates. 1 Register your product. 2 Receive updates on the latest products and technologies. 3 Download owner's manuals, order product catalogs, research new products, and much more. 4 Receive notices of software upgrades and software updates. Protecting the LCD panel and screen Do not expose the LCD screen to direct sunlight when this product is not used. This may result in LCD screen malfunction due to the resulting high temperatures. When using a cellular phone, keep the antenna of the cellular phone away from the LCD screen to prevent disruption of the video in the form of spots, colored stripes, etc. To protect the LCD screen from damage, be sure to touch the touch panel keys only with your finger and do so gently. Notes on internal memory Before removing the vehicle battery If the battery is disconnected or discharged, the memory will be erased and must be reprogrammed. Some of the settings and recorded contents will not be reset. Data subject to erasure The information is erased by disconnecting the yellow lead from the battery (or removing the battery itself). Some of the settings and recorded contents will not be reset. Resetting the microprocessor CAUTION Pressing the RESET button resets settings and recorded contents to the factory settings. - Do not perform this operation when a device is connected to this product. - Some of the settings and recorded contents will not be reset. The microprocessor must be reset under the following conditions: Prior to using this product for the first time after installation. If this product fails to operate properly. If there appears to be problems with the operation of the system. If your vehicle position is shown on the map with a signifi- cant positioning error. 1 Turn the ignition switch OFF. 2 Press the RESET button with a pen tip or other pointed implement. Refer to Checking part names and functions on page 7 Settings and recorded contents are reset to the factory settings. About this manual This manual uses diagrams of actual screens to describe operations. However, the screens on some products may not match those shown in this manual depending on the model used.