Pioneer AVIC-X910BT Owner's Manual - Page 179
Appendix
UPC - 000125629513
View all Pioneer AVIC-X910BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
Appendix Appendix Appendix Nothing is displayed and the touch panel keys cannot be used. The setting for the rear view camera Select the appropriate setting for the rear is incorrect. view camera. The shift lever was placed in [R] when the rear view camera was not connected. Press the MAP button, and then press the MENU button to return to the "Top Menu" and then select the correct polarity setting for [Back Camera]. (Page 156) There is no response when the The touch panel keys deviate from Perform touch panel calibration. (Page 157) touch panel key are touched, or the actual positions that respond to a different key responds. your touch for some reason. The external storage device (USB, SD) cannot be used. The USB storage device has been Park your vehicle in a safe place, and turn off removed immediately after plugging the engine. Turn the ignition key back to "Acc it. off". Then start the engine again, and turn the power to the navigation system back on. Problems in the AV screen Symptom Cause Action (Reference) CD or DVD playback is not pos- The disc is inserted upside down. sible. The disc is dirty. Insert the disc with the label upward. Clean the disc. The disc is cracked or otherwise da- Insert a normal, round disc. maged. The files on the disc are an irregular Check the file format. file format. The disc format cannot be played Replace the disc. back. The loaded disc is a type this system Check what type of disc it is. (For more cau- cannot play. tions about handling each type of media, refer to Page 193.) The screen is covered by a cau- The parking brake lead is not con- tion message and the video can- nected or applied. not be shown. The parking brake interlock is acti- vated. Connect the parking brake lead correctly, and apply the parking brake. Park your vehicle in a safe place and apply the parking brake. No video output from connected [AV1 Input] or [AV2 Input] setting Please read the following page and establish equipments. is incorrect. the setting correctly. (Page 140) No video output from connected The connection of the USB interface Connect both the USB plug and the RCA iPod. cable for iPod is incorrect. cable side. (If only one of these connection has been made, the iPod will not work prop- erly.) (Page 31) The audio or video skips. The navigation system is not firmly Secure the navigation system firmly. secured. No sounds are produced. The volume level will not rise. Cables are not connected correctly. Connect the cables correctly. The system is performing still, slow There is no sound during still, slow motion, or motion, or frame-by-frame playback frame-by-frame playback with DVD-Video. with DVD-Video. The system is paused or performing, For the media other than music CD (CD-DA), fast reverse or forward during the there is no sound on fast reverse or forward. disc playback. En 179