Pioneer AVIC-X910BT Owner's Manual - Page 26
Map coverage, Protecting the LCD panel, and screen, Notes on internal memory, Introduction - ipod problems
UPC - 000125629513
View all Pioneer AVIC-X910BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Chapter 01 Introduction p For more details about iPod compatibility with this navigation system, refer to the information on our website. Map coverage For more details about the map coverage of this navigation system, refer to the information on our website. Protecting the LCD panel and screen p Do not allow direct sunlight to fall on the LCD screen when this product is not being used. Extended exposure to direct sunlight can result in LCD screen malfunction due to the resulting high temperatures. p When using a cellular phone, keep the antenna of the cellular phone away from the LCD screen to prevent disruption of the video in the form of spots, colored stripes, etc. p To protect the LCD screen from damage, be sure to touch the touch panel keys with your finger and gently touch the screen. Notes on internal memory Before removing the vehicle battery If the battery is disconnected or discharged, the memory will be erased and must be reprogramed. p Some data remains. Read Returning the na- vigation system to the default or factory settings before you operate this function. = For more detailed information about the items which would be erased, refer to Returning the navigation system to the default or factory settings on page 174. Data subject to erasure The information is erased by pressing the RESET button or disconnecting the yellow lead from the battery (or removing the battery itself). However, some items remain. p Some data remains. Read Returning the na- vigation system to the default or factory settings before you operate this function. = For more detailed information about the items which would be erased, refer to Returning the navigation system to the default or factory settings on page 174. Resetting the microprocessor CAUTION Pressing the RESET button clears the settings for the AV source without clearing all the navigation function items. Please refer to the related section before clearing. = For more detailed information about the items which would be erased, refer to Returning the navigation system to the default or factory settings on page 174. The microprocessor must be reset under the following conditions: ! Prior to using this product for the first time after installation. ! If the product fails to operate properly. ! If there appear to be problems with the op- eration of the system. ! When changing the combination of equip- ment. ! When adding/removing additional pro- ducts that connect to the navigation system. ! If your vehicle position is shown on the map with a significant positioning error. 1 Turn the ignition switch OFF. 26 En