Pioneer AVIC-X910BT Owner's Manual - Page 203
Liquid crystal display LCD screen, Maintaining the LCD screen, LED light-emitting diode, backlight
UPC - 000125629513
View all Pioneer AVIC-X910BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
Appendix Liquid crystal display (LCD) screen ! If the LCD screen is near the vent of an air conditioner, make sure that air from the air conditioner is not blowing on it. Heat from the heater may break the LCD screen, and cool air from the cooler may cause moisture to form inside the navigation unit, resulting in possible damage. ! Small black dots or white dots (bright dots) may appear on the LCD screen. These are due to the characteristics of the LCD screen and do not indicate a malfunction. ! The LCD screen will be difficult to see if it is exposed to direct sunlight. ! When using a cellular phone, keep the antenna of the cellular phone away from the LCD screen to prevent disruption of the video in the form of disturbances such as spots or colored stripes. Maintaining the LCD screen ! When removing dust from the LCD screen or cleaning it, first turn the system power off, then wipe with a soft dry cloth. ! When wiping the LCD screen, take care not to scratch the surface. Do not use harsh or abrasive chemical cleaners. LED (light-emitting diode) backlight A light emitting diode is used inside the display to illuminate the LCD screen. ! At low temperatures, using the LED back- light may increase image lag and degrade the image quality because of the characteristics of the LCD screen. Image quality will improve with an increase in temperature. ! The product lifetime of the LED backlight is more than 10 000 hours. However, it may decrease if used in high temperatures. ! If the LED backlight reaches the end of its product lifetime, the screen will become dimmer and the image will no longer be visible. In that case, please consult your Appendix dealer or the nearest authorized PIONEER Service Station. En 203 Appendix