Ricoh 3045 Troubleshooting Guide - Page 14
Start, Sided Copy, Sided Copy
View all Ricoh 3045 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
When the Machine Does Not Operate As Wanted Problem Cause Solution The main power indica- This occurs in the follow- Close the exposure glass cover or ADF, tor continues blinking ing cases: and check if the machine is communicat- and does not turn off • The exposure glass ing with a computer. 1 when pressed. cover or ADF is open. • The machine is communicating with external equipment. • The hard disk is active. Original images are printed on the reverse side of the paper. You have loaded the paper incorrectly. Load paper correctly. Load paper into Tray 1-4 with the print side up, and into the LCT or bypass tray with the print side down. See p.76 "Orientation-fixed paper or two-sided paper". Misfeeds occur frequently. The tray's side guides are • Remove the paper. See p.89 "Remov- not locked. ing Jammed Paper". • Check that the side guides are locked. See p.77 "Changing the Paper Size". Misfeeds occur frequently. The tray's end guide is not set properly. • Remove the paper. See p.89 "Removing Jammed Paper". • Check that the end guide is set properly. See p.77 "Changing the Paper Size". Misfeeds occur frequently. You may have loaded pa- • Remove the paper. See p.89 "Remov- per of a size not shown ing Jammed Paper". on the paper size selector. • When using paper of a size that can- not be detected automatically, use Tray Paper Settings to set the paper size. See "Tray Paper Size: Tray 1-4", General Settings Guide and "Copy Paper", About This Machine. An error message remains, even if misfed paper is removed. When a misfeed message appears, it remains until you open and close the cover as required. Clear misfed paper, and then open and close the front cover. see p.89 "Removing Jammed Paper". An error message re- This may occur if the mains, even if consuma- HDD is not installed. bles are replaced and/or misfed paper is removed. Press the {Start} key. Cannot print in duplex mode. You cannot use paper in For duplex printing, select Tray 1-4 in the bypass tray for du- copier mode or with the printer driver. plex printing. Cannot print in duplex mode. [1 Sided Copy] is selected Select [2 Sided Copy] for Paper Type: Tray for Paper Type: Tray 1-4. 1-4. See "Paper Type: Tray 1-4", General Settings Guide. 6