Ricoh 3045 Troubleshooting Guide - Page 35
When a Message Is Displayed
View all Ricoh 3045 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
When a Message Is Displayed When a Message Is Displayed This section describes the machine's main messages. If other messages appear, follow their instructions. Message Cause Solution Put original back, check it and press Original jammed during Memo- Place originals that have not been ry Transmission. scanned on the exposure glass or ADF again. [Start]. Error occurred, A document jam or an error oc- Press [OK], and then resend the 3 and transmis- curred during Immediate pages that have not been sent. If the sion was can- Transmission. There may be a error reoccurs frequently, contact celled. problem with the machine or your service representative. the telephone line (for example noise or cross talk). Cannot detect original size. Place original again, then press [Start]. The machine failed to detect the Place original again, and then press size of the original. the {Start} key. L Call Service Functional problems with facsimile. Please call service. There is a problem with the fax. Record the code number shown in the display and contact your service representative. Other functions can be used. Memory is full. Cannot scan more. Transmitting only scanned pages. The memory is full. Remove the paper The Internal Tray 1 is full. from Internal Tray 1. If you press [Exit], the machine returns to standby mode and starts transmitting the stored pages. Check the pages that have not been sent using the Communication Result Report, and then resend those pages. Remove the paper. If the other tray is also full, the tray name shown in the display changes. Remove paper from the tray indicated in the display. 27