Ricoh 3045 Troubleshooting Guide - Page 42
key no longer lights. See Parameter Settings, General Settings Guide. If
![]() |
View all Ricoh 3045 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Troubleshooting When Using the Facsimile Function Message Cause Solution Memory is full. Cannot scan more. Transmission will be stopped. Memory became full during Parallel Memory Transmission. Check the pages that have not been sent using the Communication Result Report, and then resend those pages. Note ❒ If the "Check whether there are any network problems." message ap- pears, the machine is not correctly connected to the network or the settings of 3 the machine are not correct. If you do not need to connect to a network, you can specify the setting so this message is not displayed, and then the {Facsim- ile} key no longer lights. See "Parameter Settings", General Settings Guide. If you reconnect the machine to the network, be sure to set "Display" with User Parameters. ❒ If the paper tray runs out of paper, "No paper. Load it. then press [Exit]." appears on the display, asking you to add more paper. If there is paper left in the other trays, you can receive documents as usual, even if the message appears on the display. You can turn this function on or off with "Parameter Setting". See "Parameter Settings", General Settings Guide. Reference "Connecting to the Ethernet Interface", General Settings Guide "File Transfer", General Settings Guide "IP-Fax Settings", General Settings Guide "Parameter Settings", General Settings Guide 34
![](/manual_guide/products/ricoh-3045-troubleshooting-guide-e5ee955/42.png)