Ricoh 3045 Troubleshooting Guide - Page 55
Alert Messages, This describes the machine Alert messages.
![]() |
View all Ricoh 3045 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
When a Message Is Displayed Alert Messages This section describes the machine Alert messages. Message Cause Solution IEEE 802.11b (Wireless LAN) has a problem. • IEEE 802.11b inter- Turn off the machine and check that the face unit was not in- IEEE 802.11b interface unit is inserted serted when the correctly. Then, turn the machine on machine was turned again. If the message appears again, on, or it was pulled contact your service representative. out after the machine turned on. • The settings are not updated although the unit is detected, or errors are found while 4 accessing the unit. HDD has a problem. An error has occurred in Turn off the main power switch, and back the hard disk drive. on again. If the message appears again, contact your service representative. USB has a problem. An error has occurred in Turn off the main power switch, and back the USB interface. on again. If the message appears again, contact your service representative. Ethernet board has a problem. An error has occurred in Turn off the main power switch, and back the Ethernet board. on again. If the message appears again, contact your service representative. You do not have the privileges to use this function. This user code is not al- Contact the administrator. lowed to use the function selected. You do not have the privileges to use this function. This user code is not allowed to use the function selected. If the message continues to be displayed and you cannot switch the screen, press the {Energy Saver} key. Confirm that the display goes off, and then press the {Energy Saver} key again. The display will return to the user code entry display. When printing under the copier or printer function, press the {Energy Saver} key only after printing has finished. Authentication has failed. Authentication has failed. The entered login user Inquire the user administrator for the corname or login password rect login user name and login password. is not correct. The machine cannot per- Contact the administrator. form authentication. 47
![](/manual_guide/products/ricoh-3045-troubleshooting-guide-e5ee955/55.png)