Samsung MZ-5PA256C User Manual - Page 175

Recovering a computer 175 Starting a computer by using Symantec Recovery Disk To start a computer by using Symantec Recovery Disk 1 If you store your recovery points on a USB device, attach the device now (for example, an external hard drive). Note: You should attach the device before you restart the computer. Otherwise, Symantec Recovery Disk might not detect it. 2 Insert the Symantec Recovery Disk CD into the media drive of the computer. If Norton Ghost was installed by your computer manufacturer, the recovery environment already could be installed on your computer's hard drive. Either watch your computer monitor after the computer restarts for on-screen instructions, or refer to your manufacturer's documentation. 3 Restart the computer. If you cannot start the computer from the CD, you might need to change the startup settings on your computer. See "Configuring a computer to boot from a CD" on page 175. 4 As soon as you see the prompt Press any key to boot from CD, press a key to start Symantec Recovery Disk. Note: You must watch for this prompt. It can come and go quickly. If you miss the prompt, you must restart your computer again. 5 Read the license agreement, and then click Accept. If you decline, you cannot start Symantec Recovery Disk, and your computer will restart. Configuring a computer to boot from a CD To run Symantec Recovery Disk, you must be able to start your computer using a CD. To configure a computer to boot from a CD 1 Turn on your computer. 2 As the computer starts, watch the bottom of the screen for a prompt that tells you how to access the BIOS setup. Generally, you need to press the Delete key or a function key to start your computer's BIOS setup program.