Samsung MZ-5PA256C User Manual - Page 192
Configuring network connection settings, Getting a static IP address
View all Samsung MZ-5PA256C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
192 Recovering a computer About using the networking tools in Symantec Recovery Disk ■ On the left side of the recovery environment window, click Network, and then in the right pane click Map a Network Drive. 2 Map a network drive by using the UNC path of the computer on which the recovery point is located. For example: \\computer_name\share_name or \\IP_address\share_name You can also map a network drive from within the Recover My Computer wizard or the Back Up My Computer wizard in the recovery environment. Configuring network connection settings You can access the Network Configuration window to configure basic network settings while running in the recovery environment. To configure network connection settings 1 In the recovery environment main window, click Network, and then click Configure Network Connection Settings. 2 If you are prompted to start networking services, click Yes. Getting a static IP address If you want to restore a recovery point that is located on a network drive or share, but you are unable to map a drive or browse to the drive/share on the network (usually caused by the lack of an available DHCP service), you can assign a unique static IP address to the computer that is running the recovery environment. You can then map to the network drive or share. To get a static IP address 1 In the Network Adapter Configuration box, click Use the following IP address. 2 Specify a unique IP address and subnet mask for the computer that you want to restore. Be sure that the subnet mask matches the subnet mask of the network segment. 3 Click OK. 4 Click Close to return to the recovery environment's main menu. 5 In the Network pane, click Ping a Remote Computer.