Sony CPD-G200 Operating Instructions (primary manual) - Page 16
Specifications
![]() |
View all Sony CPD-G200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Self-diagnosis function This monitor is equipped with a self-diagnosis function. If there is a problem with your monitor or computer, the screen will go blank and the () (power) indicator will either light up green or flash orange. If the () (power) indicator is lit in orange, the computer is in power saving mode. Try pressing any key on the keyboard. d) (power) indicator If the (I) (power) indicator is green 1 Disconnect the video input cable or turn off the connected computer. 2 Press the (I..) (power) button twice to turn the monitor off and then on. 3 Move the control button ♦ for 2 seconds before the monitor enters power saving mode. MENU a If all four color bars appear (white, red, green, blue), the monitor is working properly. Reconnect the video input cable and check the condition of your computer. If the color bars do not appear, there is a potential monitor failure. Inform your authorized Sony dealer of the monitor's condition. If the (5 (power) indicator is flashing orange Press the U (power) button twice to turn the monitor off and then on. If the CU (power) indicator lights up green, the monitor is working properly. If the (!) (power) indicator is still flashing, there is a potential monitor failure. Count the number of seconds between orange flashes of the (5 (power) indicator and inform your authorized Sony dealer of the monitor's condition. Be sure to notethe model name and serial number of your monitor. Also note the make and model of your computer and video board. Specifications CRT Viewable image size Resolution Maximum Recommended Standard image area Deflection frequency* AC input voltage/current Power consumption Dimensions Mass Plug and Play Supplied accessories 0.24 mm aperture grille pitch (center) 17 inches measured diagonally 90-degree deflection FD Trinitron Approx. 327 x 243 mm (w/h) (12 7/8 x 9 5/8 inches) 16.0" viewing image Horizontal: 1600 dots Vertical: 1200 lines Horizontal: 1024 dots Vertical: 768 lines Approx. 312 x 234 mm (w/h) (12 3/8 x 9 l /4 inches) Horizontal: 30 to 96 kHz Vertical: 48 to 120 Hz 100 to 240 V, 50/60 Hz, Max. 1.7 A 130 W Approx. 404 x 413.5 x 419.5 mm (w/h/ d) (16 x 16 3/8 x 16 5/8 inches) Approx. 20 kg (44 lb 1 oz) DDC1/DDC2B/DDC2Bi/GTF See page 6 * Recommended horizontal and vertical timing condition • Horizontal sync width should be more than 1.0 psec. • Horizontal blanking width should be more than 3.0 psec. • Vertical blanking width should be more than 500 psec. Design and specifications are subject to change without notice. 16
![](/manual_guide/products/sony-cpdg200-operating-instructions-primary-manual-68381c0/16.png)