Sony CPD-G200 Operating Instructions (primary manual) - Page 9
Adjusting, brightness, contrast, centering, picture, CENTER
View all Sony CPD-G200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
II Using the control button 1 Display the main MENU. Press the center of the control button to display the main MENU on your screen. MENU 0 47 2 Select the menu you want to adjust. Highlight the desired menu by moving the control button towards the rear to go up (t), towards the front to go down (4), and left (1) or right (0) to move sideways. FRONT MENU' MENU .c• REAR 3 Adjust the menu. Move the control button left (1) or right ( adjustment. MENU ) to make the 4 Close the menu. Press the center of the control button once to return to the main MENU, and twice to return to normal viewing. If no buttons are pressed, the menu closes automatically after about 30 seconds. MENU III Resetting the adjustments Press the RESET button. See page 12 for more information on resetting the adjustments. RESET Adjusting the brightness and contrast Brightness and contrast adjustments are made using a separate BRIGHTNESS/CONTRAST menu. These settings are stored in memory for all input signals. 1 Move the control button in any direction. The BRIGHTNESS/CONTRAST menu appears on the screen. RR I (,1-1 I NESS ON IRA:-,_T 0 26 a el 26 0 2 Move the control button 3/t to adjust the brightness (-P-), and 4 ,1.-+ to adjust the contrast (a). The menu automatically disappears after about 3 seconds. Adjusting the centering of the picture (CENTER) This setting is stored in memory for the current input signal. 1 Press the center of the control button. The main MENU appears on the screen. 2 Move the control button to highlight OD CENTER and press the center of the control button again. The SIZF/CENTER menu appears on the screen. 3 First move the control button lit to select EP for horizontal adjustment, orEl for vertical adjustment. Then move the control button to adjust the centering. Adjusting the size of the picture (SIZE) This setting is stored in memory for the current input signal. 1 Press the center of the control button. The main MENU appears on the screen. 2 Move the control button to highlight EJ SIZE and press the center of the control button again. The SJZF/CENTER menu appears on the screen. 3 First move the control button 33. to select Ei) for horizontal adjustment, or M for vertical adjustment. Then move the control button 1/.■0 to adjust the size. 9