Sony CPD-G200 Operating Instructions (primary manual) - Page 6
Setup
View all Sony CPD-G200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Setup Before using your monitor, check that the following accessories are included in your carton: • Power cord (1) • Macintosh adapter (1) • Windows Monitor Information Disk (1) • Warranty card (1) • Notes on cleaning the screen's surface (1) • This instruction manual (1) Step 1: Connect your monitor to your computer Turn off the monitor and computer before connecting. Note • Do not touch the pins of the video cable connector as this might bend the pins. IN Connecting to an IBM PC/AT or compatible computer MO O Lci to video output LI 9 BM PC/AT or compatible computer • Connecting to a Macintosh or compatible computer Use the supplied Macintosh adapter. AC IN °°° Macintosh adapter supplied)* OOO.- Macintosh or to video compatible computer output * Connect the supplied Macintosh adapter to the computer before connecting the cable. This adapter is compatible with Macintosh LC, Performa, Quadra, Power Macintosh and Power Macintosh G3 series computers (sold before January, 1999). If you are connecting to a Power Macintosh G3 series that sold after January 1999, you will need a different adapter (not supplied). Macintosh II series and some older versions of PowerBook models may need an adapter with micro switches (not supplied). Step 2: Connect the power cord With the monitor and computer switched off, first connect the power cord to the monitor, then connect it to a power outlet. AG IN to a power outlet 4- to AC IN power cord (supplied) 6