Sony CPD-G200 Operating Instructions (primary manual) - Page 4

Precautions

Get Sony CPD-G200 PDF manuals and user guides View all Sony CPD-G200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

Precautions Warning on power connections • Use the supplied power cord. If you use a different power cord, be sure that it is compatible with your local power supply. For the customers in the U.S.A. If you do not use the appropriate cord, this monitor will not conform to mandatory FCC standards. Example of plug types for 100 to 120 V AC for 200 to 240 V AC • Before disconnecting the power cord, wait at least 30 seconds after turning off the power to allow the static electricity on the screen's surface to discharge. • After the power is turned on, the screen is demagnetized (degaussed) for about 5 seconds. This generates a strong magnetic field around the screen which may affect data stored on magnetic tapes and disks placed near the monitor. Be sure to keep magnetic recording equipment, tapes, and disks away from the monitor. The equipment should be installed near an easily accessible outlet. Installation Do not install the monitor in the following places: • on surfaces (rugs, blankets, etc.) or near materials (curtains, draperies, etc.) that may block the ventilation holes • near heat sources such as radiators or air ducts, or in a place subject to direct sunlight • in a place subject to severe temperature changes • in a place subject to mechanical vibration or shock • on an unstable surface • near equipment which generates magnetism, such as a transformer or high voltage power lines • near or on an electrically charged metal surface Maintenance • Clean the screen with a soft cloth. If you use a glass cleaning liquid, do not use any type of cleaner containing an anti-static solution or similar additive as this may scratch the screen's coating. • Do not rub, touch, or tap the surface of the screen with sharp or abrasive items such as a ballpoint pen or screwdriver. This type of contact may result in a scratched picture tube. • Clean the cabinet, panel and controls with a soft cloth lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent, such as alcohol or benzene. Transportation When you transport this monitor for repair or shipment, use the original carton and packing materials. Use of the tilt-swivel This monitor can be adjusted within the angles shown below. To find the center of the monitor's turning radius, align the center of the monitor's screen with the centering dots on the stand. Hold the monitor at the bottom with both hands when you turn it horizontally or vertically. Be careful not to pinch your fingers at the back of the monitor when you tilt the monitor up vertically. 90° 15° 90° Centering dots 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
Precautions
Warning
on
power
connections
•
Use
the
supplied
power
cord.
If
you
use
a
different
power
cord,
be
sure
that
it
is
compatible
with
your
local
power
supply.
For
the
customers
in
the
U.S.A.
If
you
do
not
use
the
appropriate
cord,
this
monitor
will
not
conform
to
mandatory
FCC
standards.
Example
of
plug
types
for
100
to
120
V
AC
for
200
to
240
V
AC
•
Before
disconnecting the
power
cord,
wait
at
least
30
seconds
after
turning
off
the
power
to
allow
the
static
electricity
on
the
screen's
surface
to
discharge.
•
After
the
power
is
turned
on,
the
screen
is
demagnetized
(degaussed)
for
about
5
seconds.
This
generates
a
strong
magnetic
field
around
the
screen
which
may
affect
data
stored
on
magnetic
tapes
and
disks
placed
near
the
monitor.
Be
sure
to
keep
magnetic
recording
equipment,
tapes,
and
disks
away
from
the
monitor.
The
equipment
should
be
installed
near
an
easily
accessible
outlet.
Installation
Do
not
install
the
monitor
in
the
following
places:
•
on
surfaces
(rugs,
blankets,
etc.)
or
near
materials
(curtains,
draperies,
etc.)
that
may
block
the
ventilation
holes
•
near
heat
sources
such
as
radiators
or
air
ducts,
or
in
a
place
subject
to
direct
sunlight
•
in
a
place
subject
to
severe
temperature
changes
•
in
a
place
subject
to
mechanical
vibration
or
shock
•
on
an
unstable
surface
•
near
equipment
which
generates
magnetism,
such
as
a
transformer
or
high
voltage
power
lines
•
near
or
on
an
electrically
charged
metal
surface
Maintenance
•
Clean
the
screen
with
a
soft
cloth.
If
you
use
a
glass
cleaning
liquid,
do
not
use
any
type
of
cleaner
containing
an
anti
-static
solution
or
similar
additive
as
this
may
scratch
the
screen's
coating.
•
Do
not
rub,
touch,
or
tap
the
surface
of
the
screen
with
sharp
or
abrasive
items
such
as
a
ballpoint
pen
or
screwdriver.
This
type
of
contact
may
result
in
a
scratched
picture
tube.
•
Clean
the
cabinet,
panel
and
controls
with
a
soft
cloth
lightly
moistened
with
a
mild
detergent
solution.
Do
not
use
any
type
of
abrasive
pad,
scouring
powder
or
solvent,
such
as
alcohol
or
benzene.
Transportation
When
you
transport
this
monitor
for
repair
or
shipment,
use
the
original
carton
and
packing
materials.
Use
of
the
tilt
-swivel
This
monitor
can
be
adjusted
within
the
angles
shown
below.
To
find
the
center
of
the
monitor's
turning
radius,
align
the
center
of
the
monitor's
screen
with
the
centering
dots on
the
stand.
Hold
the
monitor
at
the
bottom
with
both
hands
when
you
turn
it
horizontally
or
vertically.
Be
careful
not
to
pinch
your
fingers
at
the
back
of
the
monitor
when
you
tilt
the
monitor
up
vertically.
90°
15°
Centering
dots
90°
4