TP-Link T1700G-28TQ T1700G-28TQ V1 CLI Reference Guide - Page 104
ip ssh algorithm, 4 ip ssh timeout
View all TP-Link T1700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Example Enable SSH v2: T1700G-28TQ(config)# ip ssh version v2 15.3 ip ssh algorithm Description The ip ssh algorithm command is used to configure the algorithm in SSH function. To disable the specified algorithm, please use no ip ssh algorithm command. Syntax ip ssh algorithm { AES128-CBC | AES192-CBC | AES256-CBC | Blowfish-CBC | Cast128-CBC | 3DES-CBC | HMAC-SHA1 | HMAC-MD5 } no ip ssh algorithm Parameter AES128-CBC | AES192-CBC | AES256-CBC | Blowfish-CBC | Cast128-CBC | 3DES-CBC | HMAC-SHA1 | HMAC-MD5 -- Specify the SSH algorithm. Command Mode Global Configuration Mode Example Specify the SSH algorithm as AES128-CBC: T1700G-28TQ(config)# ip ssh algorithm AES128-CBC 15.4 ip ssh timeout Description The ip ssh timeout command is used to specify the idle-timeout time of SSH. To restore to the factory defaults, please use no ip ssh timeout command. Syntax ip ssh timeout value no ip ssh timeout Parameter value -- The Idle-timeout time. During this period, the system will automatically release the connection if there is no operation from the client. It ranges from 1 to 120 in seconds. By default, this value is 120 seconds. 90