TP-Link T1700G-28TQ T1700G-28TQ V1 CLI Reference Guide - Page 153
description
View all TP-Link T1700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Syntax interface range ten-gigabitEthernet port-list Parameter port-list -- The list of Ten Gigabit Ethernet ports. Command Mode Global Configuration Mode User Guidelines Command in the Interface Range ten-gigabitEthernet Mode is executed independently on all ports in the range. It does not affect the execution on the other ports at all if the command results in an error on one port. Example To enter the Interface Range ten-gigabitEthernet Configuration Mode, and configure Ten Gigabit Ethernet ports 1/0/25 and 1/0/26 at the same time by adding them to one port-list: T1700G-28TQ(config)# interface range ten-gigabitEthernet 1/0/25-26 20.5 description Description The description command is used to add a description to the Ethernet port. To clear the description of the corresponding port, please use no description command. Syntax description string no description Parameter string -- Content of a port description, ranging from 1 to 16 characters. Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface ten-gigabitEthernet / interface range ten-gigabitEthernet / interface port-channel / interface range port-channel) Example Add a description Port _5 to port 1/0/5: 139