TP-Link T1700G-28TQ T1700G-28TQ V1 CLI Reference Guide - Page 114
dot1x port-method
View all TP-Link T1700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
no dot1x port-control Parameter auto | authorized-force | unauthorized-force -- The Control Mode for the port. auto: In this mode, the port will normally work only after passing the 802.1X Authentication. authorized-force: In this mode, the port can work normally without passing the 802.1X Authentication. unauthorized-force: In this mode, the port is forbidden working for its fixed unauthorized status. Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface ten-gigabitEthernet / interface range ten-gigabitEthernet) Example Configure the Control Mode for Gigabit Ethernet port 1/0/20 as "authorized-force": T1700G-28TQ(config)#interface gigabitEthernet 1/0/20 T1700G-28TQ(config-if)#dot1x port-control authorized-force 16.11 dot1x port-method Description The dot1x port-method command is used to configure the control type of IEEE 802.1X for the specified port. By default, the control type is "mac-based". To restore to the default configuration, please use no dot1x port-method command. Syntax dot1x port-method { mac-based | port-based } no dot1x port-method Parameter mac-based | port-based --The control type for the port. mac-based: Any client connected to the port should pass the 802.1X authentication for access. 100