TP-Link T1700G-28TQ T1700G-28TQ V1 CLI Reference Guide - Page 147
ipv6 address link-local, 4 ipv6 address dhcp
View all TP-Link T1700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Syntax ipv6 address autoconfig Configuration Mode Interface Configuration Mode Example Enable the automatic configuration of the ipv6 link-local address on VLAN interface 1: T1700G-28TQ(config)# interface vlan 1 T1700G-28TQ(config-if)# ipv6 address autoconfig 19.3 ipv6 address link-local Description The ipv6 address link-local command is used to configure the ipv6 link-local address manually on a specified interface. To delete the configured link-local address, please use no ipv6 address link-local command. Syntax ipv6 address ipv6-addr link-local no ipv6 address ipv6-addr link-local Parameter ipv6-addr -- The link-local address of the interface. It should be a standardized IPv6 address with the prefix fe80::/10, otherwise this command will be invalid. Configuration Mode Interface Configuration Mode Example Configure the link-local address as fe80::1234 on the VLAN interface 1: T1700G-28TQ(config)# interface vlan 1 T1700G-28TQ(config-if)# ipv6 address fe80::1234 link-local 19.4 ipv6 address dhcp Description The ipv6 address dhcp command is used to enable the DHCPv6 Client function. When this function is enabled, the Layer 3 interface will try to obtain IP from DHCPv6 server. To delete the allocated IP from DHCPv6 server and 133