TP-Link T1700G-28TQ T1700G-28TQ V1 CLI Reference Guide - Page 25
Accessing Path, Prompt, Logout or Access the, next mode
View all TP-Link T1700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
The following table gives detailed information about the Accessing path, Prompt of each mode and how to exit the current mode and access the next mode. Mode Accessing Path Prompt Logout or Access the next mode User EXEC Mode Primary mode once it is connected with the switch. Privileged EXEC Mode Use the enable command to enter this mode from User EXEC mode. Global Configuration Mode Use the configure command to enter this mode from Privileged EXEC mode. T1700G-28TQ> T1700G-28TQ# T1700G-28TQ# Use the exit command to disconnect the switch. Use the enable command to access Privileged EXEC mode. Enter the exit command to return to User EXEC mode. Enter configure command to access Global Configuration mode. Use the exit or the end command or press Ctrl+Z to return to Privileged EXEC mode. Use the interface gigabitEthernet/ ten-gigabitEthernet port, interface port-channel lagid or interface range gigabitEthernet/ ten-gigabitEthernet port-list, interface range port-channel lag-list command to access interface Configuration mode. Use the vlan vlan-list to access VLAN Configuration mode. 11