TP-Link T1700G-28TQ T1700G-28TQ V1 CLI Reference Guide - Page 155
duplex, 9 jumbo
View all TP-Link T1700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Example Enable the flow-control function for port 1/0/3: T1700G-28TQ(config)# interface gigabitEthernet 1/0/3 T1700G-28TQ(config-if)# flow-control 20.8 duplex Description The duplex command is used to configure the Duplex Mode for an Ethernet port. To return to the default configuration, please use no duplex command. Syntax duplex { auto | full | half } no duplex Parameter auto | full | half -- The duplex mode of the Ethernet port. There are three options: auto-negotiation mode, full-duplex mode and half-duplex mode. By default the Gigabit Ethernet port is auto-negotiation mode. Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface ten-gigabitEthernet / interface range ten-gigabitEthernet / interface port-channel / interface range port-channel) Example Configure the Duplex Mode as full-duplex for port 1/0/3: T1700G-28TQ(config)# interface gigabitEthernet 1/0/3 T1700G-28TQ(config-if)# duplex full 20.9 jumbo Description The jumbo command is used to allow the jumbo frame to pass through this port. To disable this feature, please use no jumbo command. This feature is disabled by default. 141