TP-Link T1700G-28TQ T1700G-28TQ V1 CLI Reference Guide - Page 176
Loopback Detection Commands
View all TP-Link T1700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
Chapter 24 Loopback Detection Commands With loopback detection feature enabled, the switch can detect loops using loopback detection packets. When a loop is detected, the switch will display an alert or further block the corresponding port according to the configuration. 24.1 loopback-detection(global) Description The loopback-detection command is used to enable the loopback detection function globally. To disable it, please use no loopback detection command. Syntax loopback-detection no loopback-detection Command Mode Global Configuration Mode Example Enable the loopback detection function globally: T1700G-28TQ(config)# loopback-detection 24.2 loopback-detection interval Description The loopback-detection interval command is used to define the interval of sending loopback detection packets from switch ports to network, aiming at detecting network loops periodically. Syntax loopback-detection interval interval-time Parameter interval-time -- The interval of sending loopback detection packets. It ranges from 1 to 1000 seconds. By default, this value is 30. Command Mode Global Configuration Mode 162