TP-Link T1700G-28TQ T1700G-28TQ V1 CLI Reference Guide - Page 251

29.14 rmon event Description The rmon event command is used to configure the entries of SNMP-RMON Event. To return to the default configuration, please use no rmon event command. Event Group, as one of the commonly used RMON Groups, is used to define RMON events. Alarms occur when an event is detected. Syntax rmon event index [ user user-name ] [ description descript ] [ type { none | log | notify | log-notify }] [ owner owner-name ] no rmon event index Parameter index -- The index number of the event entry, ranging from 1 to 12. You can only select one entry for each command. user-name -- The name of the User to which the event belongs, ranging from 1 to 16 characters. By default, it is "public". descript -- The description of the event, ranging from 1 to 16 characters. By default, it is empty. type -- The event type, with none, log, notify and both options. None indicates no processing, log indicates logging the event, notify indicates sending trap messages to the management station, and both indicates logging the event and sending trap messages to the management station. owner-name -- The owner of the event entry, ranging from 1 to 16 characters. By default, it is "monitor". Command Mode Global Configuration Mode Example Configure the user name of entry 1, 2, 3 and 4 as user1, the description of the event as description1, the type of event as log and the owner of the event as owner1: T1700G-28TQ(config)# rmon event 1-4 user user1 description description1 type log owner owner1 237