TP-Link T1700G-28TQ T1700G-28TQ V1 CLI Reference Guide - Page 85
ip dhcp snooping decline rate, show ip source binding
View all TP-Link T1700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
11.11 ip dhcp snooping decline rate Description The ip dhcp snooping decline rate command is used to enable the Decline Protect feature and configure the rate limit on DHCP Decine packets. The excessive DHCP Decline packets will be discarded. To disable the Decline Protect feature, please use no ip dhcp snooping decline rate command. Syntax ip dhcp snooping decline rate value no ip dhcp snooping decline rate Parameter value -- Specify the rate limit of DHCP Decline packets, and the optional values are 0, 5, 10, 15, 20, 25 and 30 (units:packet/second). It default value is 0, which stands for "disable". Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface ten-gigabitEthernet / interface range ten-gigabitEthernet) Example Configure the rate limit of DHCP Decline packets as 20 packets per second on Gigabit Ethernet port 1/0/2: T1700G-28TQ(config)#interface gigabitEthernet 1/0/2 T1700G-28TQ(config-if)#ip dhcp snooping decline 20 11.12 show ip source binding Description The show ip source binding command is used to display the IP-MAC-VIDPORT binding table. Syntax show ip source binding Command Mode Privileged EXEC Mode and Any Configuration Mode 71