TP-Link T1700G-28TQ T1700G-28TQ V1 CLI Reference Guide - Page 239
SNMP Commands
View all TP-Link T1700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 239 highlights
Chapter 29 SNMP Commands SNMP (Simple Network Management Protocol) functions are used to manage the network devices for a smooth communication, which can facilitate the network administrators to monitor the network nodes and implement the proper operation. 29.1 snmp-server Description The snmp-server command is used to enable the SNMP function. By default, it is disabled. To return to the default configuration, please use no snmp-server command. Syntax snmp-server no snmp-server Command Mode Global Configuration Mode Example Enable the SNMP function: T1700G-28TQ(config)# snmp-server 29.2 snmp-server view Description The snmp-server view command is used to add View. To delete the corresponding View, please use no snmp-server view command. The OID (Object Identifier) of the SNMP packets is used to describe the managed objects of the switch, and the MIB (Management Information Base) is the set of the OIDs. The SNMP View is created for the SNMP management station to manage MIB objects. Syntax snmp-server view name mib-oid { include | exclude } no snmp-server view name mib-oid Parameter name -- The entry name of View, ranging from 1 to 16 characters. Each View includes several entries with the same name. 225