TP-Link T1700G-28TQ T1700G-28TQ V1 CLI Reference Guide - Page 65
user access-control ip-based
View all TP-Link T1700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
5 -- Indicates an MD5 encrypted password with fixed length will follow. encrypted-password -- An MD5 encrypted password with fixed length, which you can copy from another switch's configuration file. Command Mode Global Configuration Mode User Guidelines If both the user name (password) and user name (secret) are defined, only the latest configured password will take effect. Example Add and enable a new admin user named "tplink", of which the password is "admin". The password will be displayed in the encrypted form. T1700G-28TQ(config)#user name tplink privilege admin secret 0 admin 9.3 user access-control ip-based Description The user access-control ip-based command is used to limit the IP-range of the users' access. Only the users within the IP-range you set here are allowed to access the switch. To cancel the user access limit, please use no user access-control command. Syntax user access-control ip-based { ip-addr ip-mask } [ snmp ] [ telnet ] [ ssh ] [ http ] [ https ] [ ping ] [ all ] no user access-control Parameter ip-addr -- The source IP address. Only the users within the IP-range you set here are allowed to access the switch. ip-mask --The subnet mask of the IP address. [ snmp ] [ telnet ] [ ssh ] [ http ] [ https ] [ ping ] [ all ] -- Specify the access interface. These interfaces are enabled by default. Command Mode Global Configuration Mode 51