TP-Link T1700G-28TQ T1700G-28TQ V1 CLI Reference Guide - Page 45
show mac-vlan
View all TP-Link T1700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
effect. To disable the MAC-based VLAN function, please use no mac-vlan command. All the ports are disabled by default. Syntax mac-vlan no mac-vlan Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet/ interface ten-gigabitEthernet / interface range ten-gigabitEthernet) Example Enable the Gigabit Ethernet port 1/0/3 for the MAC-based VLAN feature: T1700G-28TQ(config)#interface gigabitEthernet 1/0/3 T1700G-28TQ(config-if)#mac-vlan 5.3 show mac-vlan Description The show mac-vlan command is used to display the information of the MAC-based VLAN entry. MAC address and VLAN ID can be used to filter the displayed information. Syntax show mac-vlan { all | mac-address mac-addr | vlan vlan-id } Command Mode Privileged EXEC Mode and Any Configuration Mode Parameter mac-addr -- MAC address, in the format of XX:XX:XX:XX:XX:XX. vlan-id -- Specify IEEE 802.1Q VLAN ID, ranging from 1 to 4094. Example Display the information of all the MAC-based VLAN entry: T1700G-28TQ(config)#show mac-vlan all 31