TP-Link T1700G-28TQ T1700G-28TQ V1 CLI Reference Guide - Page 230
ipv6 mld snooping querier vlan, ipv6 mld snooping querier vlan general, query
View all TP-Link T1700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 230 highlights
28.12 ipv6 mld snooping querier vlan Description The ipv6 mld snooping querier vlan command is used to enable the MLD Querier function. To disable this function, please use no ipv6 mld snooping querier vlan command. Syntax ipv6 mld snooping querier vlan vlan-id no ipv6 mld snooping querier vlan vlan-id Parameter vlan-id -- The VLAN that enables the MLD querier function, ranging from 1 to 4094. Command Mode Global Configuration Mode Example Enable MLD Querier function on VLAN 2: T1700G-28TQ(config)# ipv6 mld snooping querier vlan 2 28.13 ipv6 mld snooping querier vlan (general query) Description The ipv6 mld snooping querier vlan command is used to configure the parameters for MLD Snooping Querier to send a general query frame. To return to the default configuration, please use no ipv6 mld snooping querier vlan command. Syntax ipv6 mld snooping querier vlan vlan-id { query-interval interval | max-response-time response-time | general-query source-ip ip-addr } no ipv6 mld snooping querier vlan vlan-id { query-interval | max-response-time | general-query source-ip } Parameter vlan-id -- VLAN ID, ranging from 1 to 4094. interval -- The time interval to send a general query frame by MLD Snooping Querier, ranging from 10 to 300 (Seconds). By default, it is 60 seconds. response-time -- The maximal time for the host to respond to a general query frame, ranging from 1 to 25 (Seconds). By default, it is 10 Seconds. 216