TP-Link T1700G-28TQ T1700G-28TQ V1 CLI Reference Guide - Page 184
rule
View all TP-Link T1700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
T1700G-28TQ(config)# access-list extended 2220 rule 10 permit sip 192.168.0.100 smask 255.255.255.0 25.5 rule Description The rule command is used to configure MAC ACL rule. To delete the corresponding rule, please use no rule command. Syntax rule rule-id { deny | permit } [[ smac source-mac ] smask source-mac-mask ] [[ dmac destination-mac ] dmask destination-mac-mask ] no rule rule-id Parameter rule-id -- The rule ID. deny -- The operation to discard packets. permit --The operation to forward packets. It is the default value. source-mac -- The source MAC address contained in the rule. source-mac-mask -- The source MAC address mask. It is required if you typed the source MAC address. destination-mac -- The destination MAC address contained in the rule. destination-mac-mask -- The destination MAC address mask. It is required if you typed the destination MAC address. Command Mode Mac Access-list Configuration Mode Example Create a MAC ACL whose ID is 20, and add Rule 10 for it. In the rule, the source MAC address is 00:01:3F:48:16:23, the source MAC address mask is 11:11:11:11:11:00, and the packets match this rule will be forwarded by the switch: T1700G-28TQ(config)# mac access-list 20 T1700G-28TQ(config-mac-acl)# rule 10 permit smac 00:01:3F:48:16:23 smask 11:11:11:11:11:00 170