TP-Link T1700G-28TQ T1700G-28TQ V1 CLI Reference Guide - Page 149
ipv6 address eui-64, 7 ipv6 address
View all TP-Link T1700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
19.6 ipv6 address eui-64 Description This command is used to manually configure a global IPv6 address with an extended unique identifier (EUI) in the low-order 64 bits on the interface. Specify only the network prefix. The last 64 bits are automatically computed from the switch MAC address. To remove an EUI-64 IPv6 address from the interface, please use the no ipv6 address eui-64 command. Syntax ipv6 address ipv6-addr eui-64 no ipv6 address ipv6-addr eui-64 Parameter ipv6-addr -- Global IPv6 address with 64 bits network prefix, for example 3ffe::/64. Configuration Mode Interface Configuration Mode Example Configure an EUI-64 global address on the interface with the network prefix 3ffe::/64: T1700G-28TQ(config)# interface vlan 1 T1700G-28TQ(config-if)# ipv6 address 3ffe::/64 eui-64 19.7 ipv6 address Description This command is used to manually configure a global IPv6 address on the interface. To remove a global IPv6 address from the interface, please use no ipv6 address command. Syntax ipv6 address ipv6-addr no ipv6 address ipv6-addr Parameter ipv6-addr -- Global IPv6 address with network prefix, for example 3ffe::1/64. 135