TP-Link T1700G-28TQ T1700G-28TQ V1 CLI Reference Guide - Page 178
loopback-detection config
View all TP-Link T1700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Example Enable the loopback detection function of ports 1-3: T1700G-28TQ(config)# interface range gigabitEthernet 1/0/1-3 T1700G-28TQ(Config-if-range)# loopback-detection 24.5 loopback-detection config Description The loopback-detection config command is used to configure the process-mode and recovery-mode for the ports by which the switch copes with the detected loops. Syntax loopback-detection config [ process-mode { alert | port-based }] [ recovery-mode { auto | manual }] Parameter process-mode -- The mode how the switch processes the detected loops. Alert: When a loop is detected, display an alert. Port based: When a loop is detected, display an alert and block the port. recovery-mode -- The mode how the blocked port recovers to normal status. Auto: Block status can be automatically removed after recovery time. Manual: Block status can only be removed manually. Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface ten-gigabitEthernet / interface range ten-gigabitEthernet) Example Configure the loopback detection process-mode as port-based and recovery-mode as manual for port 2: T1700G-28TQ(config)# interface gigabitEthernet 1/0/2 T1700G-28TQ(config-if)# loopback-detection config process-mode port-based recovery-mode manual 164