TP-Link T1700G-28TQ T1700G-28TQ V1 CLI Reference Guide - Page 58
port-channel load-balance
View all TP-Link T1700G-28TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
8.2 port-channel load-balance Description The port-channel load-balance command is used to configure the Aggregate Arithmetic for LAG. To return to the default configurations, please use no port-channel load-balance command. Syntax port-channel load-balance { src-mac | dst-mac | src-dst-mac | src-ip | dst-ip | src-dst-ip } no port-channel load-balance Parameter src-mac -- The source MAC address. When this option is selected, the Aggregate Arithmetic will be based on the source MAC address of the packets. dst-mac -- The destination MAC address. When this option is selected, the Aggregate Arithmetic will be based on the destination MAC address of the packets. src-dst-mac -- The source and destination MAC address. When this option is selected, the Aggregate Arithmetic will be based on the source and destination MAC addresses of the packets. The Aggregate Arithmetic for LAG is "src-dst-mac" by default. src-ip -- The source IP address. When this option is selected, the Aggregate Arithmetic will be based on the source IP address of the packets. dst-ip -- The destination IP address. When this option is selected, the Aggregate Arithmetic will be based on the destination IP address of the packets. src-dst-ip -- The source and destination IP address. When this option is selected, the Aggregate Arithmetic will be based on the source and destination IP addresses of the packets. Command Mode Global Configuration Mode Example Configure the Aggregate Arithmetic for LAG as "src-dst-ip": T1700G-28TQ(config)# port-channel load-balance src-dst-ip 44