Thermador ME301YP Instructions for Use - Page 16
Before using for the first time
View all Thermador ME301YP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
en-us Before using for the first time 2. Tilt the front of the rack up about 3/4'' (2 cm) and finish pushing the rack all the way back . Note: Avoid striking the oven light cover glass when pushing the rack into position. a The back of the telescopic rack drops in to place. 3. Pull the rack forward to engage the bottom of the rack onto the rear of the rack position guide. 4. Lower the front of the rack to finish seating it on the rack guide. The rack should feel stable when properly seated. 5. Slide the movable part of the telescopic rack in and out a few times to make sure it is able to move freely and that the non-moving part of the telescopic rack is securely anchored. Removing a telescopic rack 1. Lift the front of the telescopic rack assembly about 1/ 2'' (1 cm) and push the rack to the rear about 3/4'' (2 cm). a The rack can disengage from the rack position guide. 2. Lift the rear of the telescopic rack assembly so it clears the rack position guide and gently pull the rack from the oven. Note: Do not pull the rack unevenly, this will cause it to bind during removal, catching on the oven walls. Before using for the first time Before using for the first time Before using for the first time Carry out these steps before using your appliance. ¡ The appliance must be properly installed by a qualified service provider before use. ¡ Read and understand all "safety precautions" → Page 4 and information in the Use and Care Guide prior to operating. ¡ Download the Home Connect® app to remotely control your appliance, get cooking inspiration, and access service tips and support. ¡ This Use and Care Guide covers several models. Not all features are available to all models. Cleaning the appliance before using it for the first time Clean the oven cavity and accessories before using the appliance to prepare food for the first time. 1. Remove all packaging materials from the oven cavity. For double ovens, check both oven cavities. 2. Before heating the appliance, wipe the smooth surfaces in the oven cavity with a soft, damp cloth. 3. Keep the room ventilated while the appliance is heating. 4. Set the heating mode and temperature. Heating mode Convection bake Temperature maximum Duration 1 hour 5. Switch off the appliance after the specified cooking time. 6. Wait until the oven cavity has cooled down. 7. Clean the smooth surfaces with soapy water and a dish cloth. 8. Clean the accessories using soapy water and a dish cloth or soft brush. a There may be a slight odor during first uses. This is normal and will disappear. Setting the clock The oven includes time functions that require the current time to be set. Tip: Activate Home Connect® to set and maintain the clock automatically. → "Home Connect® ", Page 21 Setting the clock Requirement: The oven is in standby mode. 1. Press CLOCK. a The display shows "SET CLOCK". 2. Press ENTER. 3. Use the numeric keypad to enter the desired time. The numbers fill in from right to left. To enter 10:45, type 1, 0, 4, 5. 4. Press ENTER. Pairing your oven with Home Connect® In order to utilize the full feature potential of the appliance, download the Home Connect® app on a smart device and pair the appliance to the home's Wi-Fi device. ▶ For step-by-step instructions, see → "Home Connect® ", Page 21. 16