Thermador ME301YP Instructions for Use - Page 30

Reinstalling the oven door

Page 30 highlights

en-us Cleaning and maintenance 5. CAUTION - Risk of injury! The door is heavy. ▶ Do not grip the door by the handle. ▶ Use both hands to firmly grip it by the sides. Maintaining the door angle, lift the door straight up approximately 3/4" (2 cm) to unhook the hinges from the slots and then pull it out towards you until the hinges are clear of the oven housing. 5. Push the levers on both the hinges up and forward until they are locked into the slot and flush with the front of the oven body. 6. Close and open the door slowly to be sure it is correctly and securely in place. 6. Place the door in a convenient and stable location. Do not lay the door on its handle. This could cause dents or scratches. Reinstalling the oven door 1. Hold the door firmly in both hands. Grip it on either side, not by the handle. 2. Tilt the door back slightly towards you until it opens about 7" (18 cm) at the top. 3. Slide the hinges into the slots as far as they will go and lower the door straight down . The angle of the door may need to be adjusted slightly to allow the hinges to engage properly and the door to lower into place. The door should lower about 3/4" (2 cm) and stop. If it does not, the hinges have not engaged properly and the door could fall if it is released. 4. Once both hinges are fully engaged, gently open the door until it is fully open. 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84

en-us
Cleaning and maintenance
30
5.
CAUTION - Risk of injury!
The door is heavy.
Do not grip the door by the handle.
Use both hands to firmly grip it by the sides.
Maintaining the door angle, lift the door straight up ap-
proximately 3/4" (2 cm) to unhook the hinges from the
slots and then pull it out towards you until the hinges
are clear of the oven housing.
6.
Place the door in a convenient and stable location.
Do not lay the door on its handle. This could cause
dents or scratches.
Reinstalling the oven door
1.
Hold the door firmly in both hands. Grip it on either side,
not by the handle.
2.
Tilt the door back slightly towards you until it opens
about 7" (18 cm) at the top.
3.
Slide the hinges
into the slots
as far as they will go
and lower the door straight down
.
The angle of the door may need to be adjusted slightly
to allow the hinges to engage properly and the door to
lower into place. The door should lower about
3/4" (2 cm) and stop. If it does not, the hinges have not
engaged properly and the door could fall if it is released.
4.
Once both hinges are fully engaged, gently open the
door until it is fully open.
5.
Push the levers on both the hinges up and forward until
they are locked into the slot and flush with the front of
the oven body.
6.
Close and open the door slowly to be sure it is correctly
and securely in place.