Thermador ME301YP Instructions for Use - Page 29
Replacing a G9 base oven light with, round glass cover, Removing the oven door from bottom, hinge
![]() |
View all Thermador ME301YP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Replacing a G9 base oven light with round glass cover Requirements ¡ "Refer to the oven light bulb chart for the oven light specification of your oven." → Page 28 ¡ "Follow the safety instructions on replacing a light bulb." → Page 28 1. Turn off the power to the oven at the main power supply (fuse or breaker box). 2. Remove the oven racks. 3. Turn the glass cover counterclockwise to remove it . Cleaning and maintenance en-us ▶ To avoid injury from hinge bracket snapping closed, be sure both levers are securely in place before removing the door. ▶ Do not force the door open or closed. a The hinge could be damaged and cause damage or injury. ▶ Do not lay the removed door on sharp or pointed objects as this could break the glass. Lay it on a flat, smooth surface, positioned so that the door cannot fall over. 1. Open the oven door to its fully open position. 2. Flip levers on hinges toward you. 4. Remove the old bulb by grasping and sliding the bulb straight back until the two prongs have cleared the ceramic holder . 5. Do not touch the glass of the new replacement bulb directly as oil from your fingers may cause the bulb to fail prematurely. Instead, grasp the replacement bulb with a clean dry cloth. Locate the two prongs in the ceramic holder, gently poking until the two prongs locate in the ceramic socket . 6. Press in to seat the bulb. 7. Screw the glass cover back on. 8. Turn on the circuit breaker. Removing the oven door from bottom hinge conventional ovens For ease of cleaning you can remove the oven door of bottom hinge ovens. WARNING Risk of injury! Failure to follow these instructions when removing the oven door may lead to personal injury or product damage. ▶ Make sure oven is cool and power to the oven has been turned off before removing the door. a Failure to do so could result in electrical shock or burns. ▶ The oven door is heavy and parts of it are fragile. Use both hands to remove the oven door. ▶ The door front is glass. Handle it carefully to avoid breakage. ▶ Grasp only the side of the oven door. Do not grasp the handle. a It may swing in your hand and cause damage or in- jury. a Failure to grasp the oven door firmly and properly could result in personal injury or product damage. If necessary, use a tool, such as a screwdriver, to gently pry the upper part of the lever away from the housing. Take care to avoid scratching the housing. 3. Bring both door hinge levers to their fullest down position. The left and right door hinges differ slightly but operate in the same manner. 4. CAUTION - Risk of injury! Follow the instructions below to prevent the latch from slamming shut and pinching or cutting your hand. Close the oven door until it catches on the hinge stop levers, locking the hinges at the proper angle for door removal. a The door will be open about 7" (18 cm) at the top. 29
![](/manual_guide/products/thermador-me301yp-instructions-use-02fe06e/29.png)