Toshiba 50CT User Guide - Page 122
Parallel Port, Not used, Std. Bi-Directional
View all Toshiba 50CT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
3 Tests and Diagnostics 3.24 SETUP (c) Parallel Port This option sets the interrupt level and I/O address for the parallel port. When the Printer Port Type (see settings below) is set to Std. Bi-directional, the options are: LPT setting LPT 1 LPT 2 LPT 3 Not Used Others Interrupt level 7 5 7 (Default) I/O address 378H 278H 3BCH (Other settings are made automatically by the Plugand-Play operating system.) When the Printer Port Type (see settings below) is set to ECP, the DMA channel can also be set to 1, 2, or 3. The default is 3. LPT setting LPT 1 LPT 2 LPT 3 Not Used Others Interrupt level 7 5 7 I/O address 378H 278H 3BCH (Default) DMA Channel 3 3 3 (Other settings are made automatically by the Plug-andPlay operating system.) When you select one of the above options, except for Not used, a subwindow similar to the one below displays to let you set the parallel port mode. The options for this setting are ECP (default) and Std. Bi-Directional. OPTIONS Mode DMA = ECP = Channel 3 For most printers, the port should be set to ECP. With other parallel devices, the setting should be Std. Bi-Directional. Libretto 50CT/70CT Maintenance Manual 3-57