Toshiba 50CT User Guide - Page 87
Async Test, Tests and Diagnostics
View all Toshiba 50CT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
3.10 Async Test 3 Tests and Diagnostics 3.10 Async Test To execute the Async Test select 7 from the Diagnostic Test Menu, press Enter and follow the directions displayed on the screen. The async test contains seven subtests that test the asynchronous communication functions. Move the highlight bar to the subtest you want to execute and press Enter. Subtests 01 through 07 require the following data format: Method: Asynchronous Speed: 9600BPS (Subtests 01 to 04) 38400BPS (Subtests 05 to 07) Data: 8 bits and one parity bit (EVEN) Data pattern: 20h to 7Eh The following message displays at the bottom of the screen when Subtests 01, 03, and 04 are selected: Channel#1 = XXXXh Channel#2 = XXXXh Channel#3 = XXXXh Select the Channel number (1/2/3) The serial I/O port address is specified by the XXXXh number. Select the serial port channel number, and press Enter to start the subtest. Subtest 01 Wraparound (board) NOTE: To execute this subtest a serial port wraparound connector (34M741621G01) must be connected to the serial port. The serial port wraparound connector wiring diagram is described in Appendix E. Subtest 02 This subtest checks the data send/receive function through the wraparound connector. Point to point (send) NOTE: To execute this subtest, two machines must be connected with a serial port direct cable. One machine should be set as "send"(Subtest 02) and the other set as "receive" (Subtest 03). The wiring diagram for the serial port direct cable is described in Appendix E. This subtest sends 20h through 7Eh data to the receive side, then receives the sent data and compares it to the original data. 3-22 Libretto 50CT/70CT Maintenance Manual