Toshiba 50CT User Guide - Page 75
Memory Test, Tests and Diagnostics
![]() |
View all Toshiba 50CT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
3.5 Memory Test 3 Tests and Diagnostics 3.5 Memory Test To execute the Memory Test select 2 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Memory Test contains six subtests that test the computer's memory. Move the highlight bar to the subtest you want to execute and press Enter. Subtest 01 RAM constant data (real mode) This subtest writes a 256-byte unit of constant data to conventional memory (0 to 640 KB), then reads the new data and compares the result with the original data. The constant data is FFFFh, AAAAh, 5555h, 0101h, and 0000h. Subtest 02 RAM address pattern data (real mode) This subtest writes address pattern data created by the exclusive-ORing (XORing), to the address segment and address offset in conventional memory (from program end to 640 KB), then reads the new data and compares the result with the original data. Subtest 03 RAM refresh (real mode) This subtest writes a 256-byte unit of constant data to conventional memory (0 to 640 KB), then reads the new data and compares the result with the original data. The constant data is AAAAh and 5555h. Subtest 04 NOTE: There is a short delay between write and read operations, depending on the size of the data. Protected mode This subtest writes constant data and address data to extended memory (maximum address 100000h), then reads the new data and compares the result with the original data. 3-10 Libretto 50CT/70CT Maintenance Manual
![](/manual_guide/products/toshiba-50ct-user-guide-4be2e26/75.png)